Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price:
19.95
New 3 dimensional slide cover plates for your Glock pistol! The plates are machined aluminum and they fit all Glock Gen 1-5 models (except for the G42, 43 and 43x).
Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.
Ships to USA only!
Vendor: Gemini
Type: Internal
Price:
0.00
You asked for it...The consumerlawyernetwork shooting shirt, in elegant black/silver with either pink, purple or teal. Or try the fun, leopard print version!
The shirts are not purchased on this website, they are ordered directly from Gemini and will be custom-made for you here in the USA. Pricing will be available at the Gemini button link below, and this varies according to shirt style and selected options.
Front: The pre-set position of consumerlawyernetwork logo cannot be changed. You can add your name, and additional logos, if you wish.
Back: The pre-set position of consumerlawyernetwork logo cannot be changed. You can add your name, and additional logos, if you wish.
Sleeves: Blank. Add consumerlawyernetwork logo or your own.
Three shirt styles are available: a zippered polo, a crew neck and a V-neck style, in both short and long sleeves.
You have the option of a "Shooter's Cut" - This will taper the shirt in so that it's 2" narrower at the waist. The photos are of a shooter's cut shirt. If you want this, you should request it in the Gemini instruction box when you place your order. You can also do so at the time they send you the electronic proof.
Pricing is a special consumerlawyernetwork rate - you will go directly to Gemini's website to place your order. Just click the button below. THIS WILL BE A SEPARATE TRANSACTION TO ANY ORDER THAT YOU PLACE FOR OTHER ITEMS ON consumerlawyernetwork.COM.
How your shirt is made:
It is produced using a process called Dye Sublimation. Most pieces start out as a single section of large white material. This material is then dyed using a ultra high temperature heat press to create one large piece of dyed fabric. All of the smaller pieces (sleeves, collar, front, back, ect.) are then cut out from the larger piece, hemmed, and subsequently sewn together to become the finished product.
Material Specs:
REVIEW: Best Apparel Options for Serious Women Hunters & Shooters - Guns.com
For Current Order Processing Time - Check Gemini's website when you place your order.
Vendor: Soteria
Type: Holsters: On-Body Holsters
Price:
169.00
Thrasos was the "Spirit of Boldness" in Greek mythology.
This outside-the-waistband, leather holster has straps that wrap around the belt to secure the holster in place. It's small and compact, lying close to the body and ensuring greater concealability.
There's a body shield on the back of the holster that covers the back of the slide, hammer, and rear sight. This helps when wearing clothing that you don't want the gun to be rubbing against. It also puts a protective layer of leather between your body and the gun.
Made to fit a 1.5" belt.
Designed by a woman, made by a woman, for women (although guys love it too!) Personalize it! You get to choose your leather color and your thread color, and can upgrade the basic, included snaps to crystal snaps.
Made in the USA!
Vendor: Soteria
Type: Holsters: On-Body Holsters
Price:
169.00
A gorgeous butterfly design is carved onto an outside-the-waistband, leather holster. This holster is the same style as the Thrasos holster, just with the added butterfly design. Thrasos was the "Spirit of Boldness" in Greek mythology.
The holster has straps that wrap around the belt to secure the holster in place. It's small and compact, lying close to the body and ensuring greater concealability.
There's a body shield on the back of the holster that covers the back of the slide, hammer, and rear sight. This helps when wearing clothing that you don't want the gun to be rubbing against. It also puts a protective layer of leather between your body and the gun.
Made to fit a 1.5" belt.
Designed by a woman, made in the USA by a woman, for women!
A comfortable holster, and the butterfly etching gives it an elegant, feminine touch!
Personalize it - You get to choose your leather color and your thread color, and can upgrade the basic, included snaps to crystal snaps.
Vendor: Soteria
Type: Holsters: On-Body Holsters
Price:
79.00
In Greek, Alexandra means "protector of man". The Alexandra is a tuckable, inside-the-waistband genuine leather holster, designed to sit in the 3 to 5 o'clock positions (or just behind the strong side hip). This holster is made for comfort, using the least amount of leather possible!
Designed by a woman, made by a woman, for women - although guys love it too!
FEATURES:
Vendor: Soteria
Type: Holsters: On-Body Holsters
Price:
169.00 - 235.00
(10 variants)
Gorgeous floral designs are carved onto an outside-the-waistband, leather holster. This holster is the same style as the Thrasos holster, just with the added floral design. Thrasos was the "Spirit of Boldness" in Greek mythology.
You have a choice of 3 floral design styles:
Features:
Designed by a woman, made by a woman, for women! A comfortable holster, and the floral etching gives it an elegant, feminine touch!
Vendor: Soteria
Type: Holsters: On-Body Holsters
Price:
68.00
Deep concealability is what the "Athena" inside-the-waistband holster offers. Athena is custom-made, with genuine leather and your choice of thread colors. Rides low enough that the grip of the gun is only 1/4" to 1/2" above the waistband and is available with 4 clip options.
Athena was the Greek goddess of wisdom, warfare, battle strategy, and heroic endeavors.
Clip Styles:
Designed by a woman, made by a woman, for women (although guys love this style too) - Made in the USA!
Vendor: Cooks
Type: Holsters: Vehicle & Household
Price:
39.95
This holster has a flat back lined with Velcro and is designed to be mounted to a hard surface like furniture or inside a vehicle. It can also be attached with hardware.
The holster includes the hook side (the rough side) attached to the back of the holster and a loose sheet of adhesive-backed loop (soft side).
FEATURES:
WHAT DRAW DO YOU NEED?
Picture this holster as though you are wearing the flat side against your body. If that is how you are going to need it positioned for your draw, eg. inside a jacket pocket on your strong side or on the inside of a vehicle center console that you can draw from the driver's side, then you would need to order the same draw as if you were wearing it on your waistband, ie. order your strong-side draw.
If you are going to attach this holster to a surface away from your body, or facing your body, then mimic or visualize your draw from that position, to figure out where the grip will end up and which side you need the velcro on. Some applications would need an opposite side draw than what you'd get if it was on your body - eg. attached on the outside of a vehicle center console on the drivers side (as shown in the main product pic).
With the gun inserted, a right-hand draw flat-back holster will have the velcro (flat side) on the gun's left side. A left-hand draw holster will have the velcro (flat side) on the gun's right side. Ask us if you need guidance on this.
A NOTE ABOUT RETENTION:
Because of the construction of the holster, there is no adjustable retention or "audible snap" retention. This is impossible when one side of the holster is flat, rather than molded around the gun. There is some retention, you just can't tip the holster upside down, shake it and expect the gun to stay in the holster. So this holster is best suited for hard surfaces or applications where it will remain upright. Some customers do use this holster inside bags and packs, we just want you to be aware of the way the retention is impacted by the flat-back design, so that you can make a good decision about which product is best for you.
For retention that keeps the gun in the holster even when tipped upside down, take a look at the Adhesive Velcro Quick-Ship Holster instead. That ships with loose hook and loop velcro sheets, so you can attach as needed. It also has a lot less kydex material (since it's not designed to be mounted to a surface), so it's better suited for use in bags, packs or pockets.
Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price:
24.95
These replacement magazine floor plates for Glocks are made of durable aluminum, anodized in several fun colors! What to engrave on them? Well, that is totally up to you! Upload an image for a custom plate or send in your custom text - get ideas from our examples below.
Laser Engraving Process:
Need Ideas? Take a look at the table below for examples of the types of images that work best. You can request them if you want - simply enter the graphic name in the "Custom Graphic" field. Don't see anything you like? Something else in mind? Find a non-copyrighted graphic and upload it!
We can't engrave: Marvel Comics copyrighted images eg. The Punisher. Sanrio copyrighted images, eg. Hello Kitty. Glock logo. Copyrighted business logos, unless you are the owner or you have written permission from the copyright holder.
Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.
Vendor: Unique AR
Type: Gun Accessories: Rifle
Price:
70.00
We've already made it possible for you to turn your AR into ART with gorgeous, patterned handguards! Now, add a pop of color under your handguard with this heat shield! These heat shields were specifically designed to fit the original series aluminum patterned handguards that we offer on this site. You can view the handguards here. They may not fit other brands of handguards.
The shield is designed to slide under the handguard and over the 556 castle bolt, and is attached using an end cap (will NOT fit breached-end handguards, eg. Freedom Eagle).
End cap will accept barrels up to 0.95" in diameter. Choose what style of end cap you prefer - one that has a sprocket with spikes, or a flat sprocket. Get it basic black or add any Cerakote color you wish!
Made in the USA & Ships FREE!
Gas Block Fit: This will work with all low-profile (0.75") gas blocks.
Heat Shield weight with end cap: Roughly 7 oz
What's included: You are buying a heat shield with end cap and screws only. Handguards are not included. Need a handguard? Get one here.
So what size heat shield will you need to order to fit your handguard? Keep in mind there is an end cap. The end cap is 1" wide and will need to fully fit into the handguard without interfering with the gas block. So whatever the length of your gas block is from the face of the upper, we need to allow 1" of additional space between the gas tube and the end of the handguard for the end cap.
These are the general lengths for gas blocks - please check yours:
Add 1" to these above length to allow the heat shield end cap to fit inside the handguard without hitting the gas block. This number is the minimum length your handguard needs to be.
This means that:
In other words, when selecting a handguard from our Patterned Handguard line:
Need help with this? Get in touch before you order!
COLOR SELECTION:
Standard heat shield is cerakoted in Armor Black. Want it in a different color? The choice is yours! Click on images to enlarge and see more details about colors & patterns pictured. Heat shields are shown installed under handguards.
ALL Cerakote colors are available as an optional extra (+$35 per color) - we must have the Cerakote color number, so please locate that using the link below to view all color swatches on Cerakote's site. Then just enter your desired color name & number in the field provided.
** The orange color you see in the pics is a custom color called UAR Burnt Orange. If that's the color you want, just enter that name in the color name text field.
Vendor: Unique AR
Type: Gun Accessories: Rifle
Price:
185.00 - 383.00
(9 variants)
Due to current demand, processing times are as follows: Black/Raw - ships within 1 week; 1 Color - ships within 1-2 weeks; 2 Color - ships within 2-3 weeks; 3+ Color - ships within 3-4 weeks.
Turn your AR into ART! These stunning, free-floating handguards won't just make your AR-15 stand out, they are also built to perform! Scroll down to see customer photos & get color ideas.
They're made in the USA and precision-machined to provide a rock-steady platform that securely and accurately indexes all your rail attachments.
ORIGINAL SERIES FEATURES:
Weight varies slightly depending on the design. But 12" handguards are roughly 8-9 oz and 15" handguards are roughly 10-11 oz. The barrel nut is 4.5 oz. The Hex Ultralight is the lightest design (15" is under 11oz including the barrel nut).
Compatibility:
Installation:
Installation:
Lengths available depend on design and vary in price. Some designs with text don't work on the shorter handguards: Freedom Eagle, Molon Labe & We the People are not available in shorter lengths.
Click/tap to enlarge. Please note: The consumerlawyernetwork logo is incorporated in the two GG designs (Lace and Roses). The other designs all have the manufacturer's logo on them.
Want it Cerakoted? The color choice is yours and we do it all for you! All H-Series Cerakote colors are available as an optional extra (+$35 per color)! For color ideas, take a look at the Handguard Gallery.
We need the Cerakote color name & number for every color you select, so please browse the color swatches on the Cerakote site using the link below and locate that info. Then just enter your desired color name & number in the field provided when you make your options selections (For firearms, H-Series colors only). If you need our input or advice, get in touch to discuss and to ensure that your custom handguard turns out exactly as you envision it!
Please note that colored handguards are non-returnable. Only Raw or Armor Black Handguards can be returned. If you purchase a color upgrade and then decide to change colors after your handguard has been painted, we can do that, but paint already applied is not refundable and each new color used will be at the regular color cost, ie. $35 per color.
VIEW ALL H-SERIES CERAKOTE COLORS
You also have the option to create a multi-color custom look by combining any number of colors together. We will let you know if you select something that won't work!
There are different ways to accomplish multi-color application:
1. Main Color & Cut Edge Color:
2. Blended Multi-Color Application
3. Specific Color Application
COLOR-MATCHING PARTS:
If you already have colored parts that you are trying to match your handguard to, achieving a precise color match will be tricky. Even if the same color is used, every Cerakote application can have slight but noticeable color differences. We suggest trying to complement or contrast colors rather than matching. Alternatively, have all parts Cerakoted together - get your handguard from us raw (no color) for Cerakoting elsewhere. Unfortunately we don't Cerakote parts other than the handguard and its hardware/accessories.
Vendor: Cooks
Type: Holsters: On-Body Holsters
Price:
32.95
These molded kydex trigger-guards offer a minimalist way to carry inside-the-waistband! They're made to protect the entire trigger-guard area of your firearm.
Features:
Clip styles:
Three ride heights to choose from:
CHOOSE YOUR RIDE HEIGHT - the image shows how deep the gun will ride when worn, with the red line roughly representing how much of the grip will be visible above your waistband.
Vendor: Cooks
Type: Holsters: Vehicle & Household
Price:
24.95
These molded kydex trigger-guard covers are made to protect the entire trigger-guard area of your firearm. They could be used when you want to carry your firearm but are not able to carry it in a holster. They also work great if you're staging your firearm off-body and want it immediately accessible but with a protected trigger guard.
We include 2 feet of black 550 paracord attached to the kydex holster, to aid in the removal of the cover. Simply jerk down on the cord and the cover comes off the trigger guard or attach the cord to something firm and pull the firearm away from the cover.
MODELS: More than 250 gun models to choose from, but this holster style is not available for models with lasers or lights as this minimalist design does not support the extra weight.
COLORS: Printed holsters are not returnable. Only solid black is returnable.
TIP - Loosening retention: If you prefer a looser fit for your cover, put your gun in a food storage bag (or any thick plastic bag). Insert your gun and bag into the cover. Using a hair dryer gently warm the cover until you feel it begin to relax. Allow the cover to cool with the gun and bag still inside it.
Vendor: Rio Grande
Type: Gun Accessories: Grips
Price:
64.95 - 119.95
(3 variants)
These grips feature full-color, full-coverage images! Select a stock graphic, or submit your own for a custom set of grips!
The grips are molded using a high strength, engineered polymer that provides toughness and durability. They are decorated with a patented printing method that infuses the inks into the polymer grip material and provides one of the most permanent image results available today. Unlike other decorated grips, the images on these grips are resistant to salt, oil, solvent, water, impact and abrasion. The images aren't on the grips, they're in the grips.
Available for: 1911 (all mil-spec full size , compact & clones), Sig P938, Beretta 92, Ruger Revolvers
AVAILABLE GRAPHIC OPTIONS
Available Stock Graphics (64.95-74.95) - Hover/touch to view design name. Click/tap to enlarge.
Semi-Custom (+$25): If you would like initials, a date or a name to be added to an existing stock design (no color changes or extra text), select the semi-custom option.
Fully Custom (+$50): We don't create artwork from scratch, but we will work with the image/s or artwork that you want to use. Custom grips are +$55 for the first set. Subsequent identical sets are the stock price for that grip style (we save the template, so re-orders or multiple identical sets are not considered custom).
Need ideas? Browse through these pics of custom designs! VIEW CUSTOM GRIPS GALLERY
Steps for custom orders:
Vendor: RYG
Type: Gun Accessories: Engraved Gun Parts
Price:
24.95
These replacement slide cover plates for Glock are made of durable aluminum and anodized in several fun colors! What to engrave on them? That is totally up to you! Upload an image or text for a custom plate, or select one of the example graphics in the gallery below.
Laser Engraving Process:
Need Ideas? Take a look at the table below for examples of the types of images that work best. You can request them if you want - simply enter the graphic name in the "Custom Graphic" field. Don't see anything you like? Something else in mind? Find a non-copyrighted graphic and upload it!
We can't engrave: Marvel Comics copyrighted images eg. The Punisher. Sanrio copyrighted images, eg. Hello Kitty. Glock logo. Copyrighted business logos, unless you are the owner or you have written permission from the copyright holder.
Disclaimer: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither consumerlawyernetwork Inc, nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of "GLOCK" on this page is merely to advertise the sale of Glock pistols, parts or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts, visit www.glock.com.